Neurotechnology Licensing Model

Customers interested in the Neurotechnology SDK's and End User Products may find details about the licensing models here for each of the offered products.

Contents of this page:

• Licensing MegaMatcher software
• Licensing MegaMatcher Accelerator
• Licensing MegaMatcher On Card
• Licensing VeriFinger software
• Licensing VeriLook software
• Licensing VeriLook Surveillance software
• Licensing VeriEye software
• Licensing VeriSpeak software
• Licensing SentiSight software
• Licensing SentiSight Embedded software
• Licensing SentiGaze software
• Licensing NCheck Bio Attendance software
• Licensing NVeiler Video Filter plug-in
• Licensing Model for value-added resellers (VAR)

Licensing MegaMatcher Software

Licensing MegaMatcher Accelerator

MegaMatcher Accelerator is a ready-to-use server-side solution that accepts tasks from client-side software. Integrators develop client-side software according to their needs and then deploy the system as a whole.

MegaMatcher 5.1 Extended SDK includes components and samples for developing the client-side software to use with MegaMatcher Accelerator.

MegaMatcher Accelerator 7.0 is available in these versions:

• MegaMatcher Accelerator 7.0 Extended licenses; each license allows the use of the included engines on a single server unit:
  • MegaMatcher Accelerator 7.0 fingerprint engine license.
  • MegaMatcher Accelerator 7.0 iris engine license.
  • MegaMatcher Accelerator 7.0 face engine license.
  • MegaMatcher Accelerator 7.0 fingerprint and face engines license – the engines may be used as a fused matching engine.
  • MegaMatcher Accelerator 7.0 fingerprint and iris engines license – the engines may be used as a fused matching engine.
  • MegaMatcher Accelerator 7.0 face and iris engines license – the engines may be used as a fused matching engine.
  • MegaMatcher Accelerator 7.0 fingerprint, face and iris engines license – the engines may be used as a fused matching engine.
• MegaMatcher Accelerator 7.0 Extended units with server hardware and pre-installed biometric engines. The available engines are the same, as mentioned above.
• MegaMatcher Accelerator 7.0 Standard licenses; each license allows the use of the included engines on a single PC:
  • MegaMatcher Accelerator 7.0 fingerprint engine license.
  • MegaMatcher Accelerator 7.0 iris engine license.
  • MegaMatcher Accelerator 7.0 face engine license.
  • MegaMatcher Accelerator 7.0 fingerprint and face engines license – the engines may be used as a fused matching engine.
  • MegaMatcher Accelerator 7.0 fingerprint and iris engines license – the engines may be used as a fused matching engine.
  • MegaMatcher Accelerator 7.0 face and iris engines license – the engines may be used as a fused matching engine.
  • MegaMatcher Accelerator 7.0 fingerprint, face and iris engines license – the engines may be used as a fused matching engine.
• MegaMatcher Accelerator 7.0 Development Edition: a MegaMatcher Accelerator 7.0 fingerprint, face and iris engines license is included with MegaMatcher 5.1 Extended SDK.

All versions of MegaMatcher Accelerator 7.0 also include Fast Fingerprint Matcher, Fast Face Matcher, Fast Iris Matcher and Voice Matcher components for use in situations where the MegaMatcher Accelerator matching engine is either not required or cannot be used.

One free license for MegaMatcher Accelerator 7.0 Development Edition is included with MegaMatcher 5.1 Extended SDK. The MegaMatcher Accelerator 7.0 Extended and Standard licenses, as well as MegaMatcher Accelerator 7.0 Extended units may be purchased by the MegaMatcher 3.x / 4.x / 5.x Extended SDK customers.

Licensing VeriFinger

Product Development

An integrator should obtain either a VeriFinger 7.1 Standard SDK (EUR 339) or VeriFinger 7.1 Extended SDK (EUR 859) to develop a product based on VeriFinger technology. The SDK needs to be purchased just once and may be used by all the developers within the integrator's company.

VeriFinger SDKs include a number of components; each particular component has specific functionality. A license for an individual VeriFinger component is required for each computer or device that run the component.

(1) Fingerprint Client component includes Fingerprint Extractor, Fingerprint Segmenter, Fingerprint BSS and Fingerprint WSQ components, which can be also obtained separately. The Fingerprint Client concurrent license may be also used for running the Embedded Fingerprint Client on multiple Android devices.

Components are copy-protected – a license is required for a component to run. License activation options are listed below on this page.

Additional component licenses may be obtained by VeriFinger 7.1 SDK customers as required by their development process.

Product Deployment

To deploy a product developed with VeriFinger 6.3 / 6.4 / 6.5 / 6.6 / 6.7 / 7.0 / 7.1 SDK, an integrator need obtain only the additional licenses required for the particular VeriFinger 7.1 components that will run on each computer or device belonging to their customers. The available VeriFinger components and license types for product deployment are the same as for product development.

EEach VeriFinger component running on a computer belonging to the integrator's customer requires a license. License activation options are listed below on this page.

Single computer licenses

A single computer license allows the installation and running of a VeriFinger component installation on one computer or device. Neurotechnology provides a way to renew the license if the computer undergoes changes due to technical maintenance.

Each single computer license requires activation for a VeriFinger component to run. The available activation options are listed below on this page.

Additional single computer licenses for VeriFinger components may be obtained at any time by VeriFinger SDK customers.

Concurrent network licenses

Concurrent licenses are available for Fingerprint Client component, allowing the installation of this specific component on an unlimited number of computers. An application obtains a specific license to perform template creation (extraction). The Fingerprint Client component requires at least 0.6 seconds for fingerprint enrolling. After this interval the license is released, making it available for another user. One Fingerprint Client concurrent license can be shared among hundreds of users, making this license especially useful for web-based software.

TThe number of simultaneously running Fingerprint Client component instances is limited by the number of concurrent licenses. Available license management options are listed below on this page.

The concurrent license for Fingerprint Client also allows to run the Embedded Fingerprint Client on multiple Android devices.

Additional concurrent network licenses may be obtained at any time by VeriFinger SDK customers.

License activation options

Single computer and concurrent network licenses are supplied in three ways:

• Serial numbers are used to activate licenses for particular VeriFinger components. The activation is done via the Internet or by email. After activation the network connection is not required for single computer license usage.
  Note: activation by serial number is not suitable for virtual environments .
• Internet activation. A special license file is stored on a computer or an Android device; the license file allows to run particular VeriFinger components on that computer or device after checking the license over the Internet. Internet connection should be available for a short period of time at least once in 7 days . A single computer license can be transferred to another computer or device by moving the license file there and waiting until the previous activation expires.
• LLicenses may be stored in a volume license manager dongle. License activation using volume license manager may be performed without connection to the Internet and is suitable for virtual environments.

Volume license manager

Volume license manager is used on site by integrators or end users to manage licenses for VeriFinger components. It consists of license management software and a dongle, used to store the purchased licenses. An integrator or an end-user may use the volume license manager in the following ways:

• Activating single computer licenses – An installation license for a VeriFinger component will be activated for use on a particular computer. The number of available licenses in the license manager will be decreased by the number of activated licenses.
• Managing single computer or concurrent licenses via a LAN or the Internet – The license manager allows the management of installation licenses for VeriFinger components across multiple computers or Android devices in a LAN or over the Internet. The number of managed licenses is limited by the number of licenses in the license manager. No license activation is required and the license quantity is not decreased. Once issued, the license is assigned to a specific computer or device on the network.
• Using license manager as a dongle – A volume license manager containing at least one license for a VeriFinger component may be used as a dongle, allowing the VeriFinger component to run on the particular computer where the dongle is attached.

Additional VeriFinger component licenses for the license manager may be purchased at any time. Neurotechnology will generate an update code and send it to you. Simply enter the code into the license manager to add the purchased licenses.

VeriFinger 7.1 enterprise license

The VeriFinger enterprise license allows an unlimited use of VeriFinger components in end-user products for a specific territory, market segment or project. Specific restrictions would be included in the licensing agreement.

The enterprise license price depends on the application size and the number of potential users of the application within the designated territory, market segment or project.

For more information please contact us.

Licensing VeriLook

For VeriLook Surveillance, please see Licensing VeriLook Surveillance SDK .

Product Development

An integrator should obtain either a VeriLook 5.6 Standard SDK (EUR 339) or VeriLook 5.6 Extended SDK (EUR 859) to develop a product based on VeriLook technology. The SDK needs to be purchased just once and may be used by all the developers within the integrator's company.

VeriLook SDKs include a number of components; each particular component has specific functionality. A license for an individual VeriLook component is required for each computer or device that run the component.

(1) Face Client component includes Face Extractor, Face Token Image and Face BSS components, which can be also obtained separately. The Face Client concurrent license may be also used for running the Embedded Face Client on multiple Android devices.

Components are copy-protected – a license is required for a component to run. License activation options are listed below on this page.

Additional component licenses may be obtained by VeriLook 5.6 SDK customers as required by their development process.

Product Deployment

To deploy a product developed with VeriLook 5.x SDK, an integrator need obtain only the additional licenses required for the particular VeriLook 5.6 components that will run on each computer or device belonging to their customers. The available VeriLook components and license types for product deployment are the same as for product development.

EEach VeriLook component running on a computer belonging to the integrator's customer requires a license. License activation options are listed below on this page.

Single computer licenses

A single computer license allows the installation and running of a VeriLook component installation on one computer or device. Neurotechnology provides a way to renew the license if the computer undergoes changes due to technical maintenance.

Each single computer license requires activation for a VeriLook component to run. The available activation options are listed below on this page.

Additional single computer licenses for VeriLook components may be obtained at any time by VeriLook SDK customers.

Concurrent network licenses

Concurrent licenses are available for Face Client component, allowing the installation of this specific component on an unlimited number of computers. An application obtains a specific license for the capturing process and to perform template creation (extraction). On average it takes less than 10 seconds for face capturing/enrolling. After this interval the license is released, making it available for another user. One Face Client concurrent license can be shared among tens of users, making this license especially useful for web-based software.

TThe number of simultaneously running Face Client component instances is limited by the number of concurrent licenses. Available license management options are listed below on this page.

The concurrent license for Face Client also allows to run the Embedded Face Client on multiple Android devices.

Additional concurrent network licenses may be obtained at any time by VeriLook SDK customers.

License activation options

Single computer and concurrent network licenses are supplied in three ways:

• Serial numbers are used to activate licenses for particular VeriLook components. The activation is done via the Internet or by email. After activation the network connection is not required for single computer license usage.
  Note: activation by serial number is not suitable for virtual environments .
• Internet activation. A special license file is stored on a computer or an Android device; the license file allows to run particular VeriLook components on that computer or device after checking the license over the Internet. Internet connection should be available for a short period of time at least once in 7 days . A single computer license can be transferred to another computer or device by moving the license file there and waiting until the previous activation expires.
• LLicenses may be stored in a volume license manager dongle. License activation using volume license manager may be performed without connection to the Internet and is suitable for virtual environments.

Volume license manager

Volume license manager is used on site by integrators or end users to manage licenses for VeriLook components. It consists of license management software and a dongle, used to store the purchased licenses. An integrator or an end-user may use the volume license manager in the following ways:

• Activating single computer licenses – An installation license for a VeriLook component will be activated for use on a particular computer. The number of available licenses in the license manager will be decreased by the number of activated licenses.
• Managing single computer or concurrent licenses via a LAN or the Internet – The license manager allows the management of installation licenses for VeriLook components across multiple computers or Android devices in a LAN or over the Internet. The number of managed licenses is limited by the number of licenses in the license manager. No license activation is required and the license quantity is not decreased. Once issued, the license is assigned to a specific computer or device on the network.
• Using license manager as a dongle – A volume license manager containing at least one license for a VeriLook component may be used as a dongle, allowing the VeriLook component to run on the particular computer where the dongle is attached.

Additional VeriLook component licenses for the license manager may be purchased at any time. Neurotechnology will generate an update code and send it to you. Simply enter the code into the license manager to add the purchased licenses.

VeriLook 5.6 enterprise license

The VeriLook enterprise license allows an unlimited use of VeriLook components in end-user products for a specific territory, market segment or project. Specific restrictions would be included in the licensing agreement.

The enterprise license price depends on the application size and the number of potential users of the application within the designated territory, market segment or project.

Licensing VeriLook Surveillance SDK

For VeriLook 5.0 SDK, please see Licensing VeriLook 5.0 SDK.

Product Development

An integrator should obtain a VeriLook Surveillance 3.1 SDK (EUR 790) to develop a product based on VeriLook Surveillance technology. The SDK needs to be purchased just once and may be used by all the developers within the integrator's company.

VeriLook Surveillance 3.1 SDK includes VeriLook Surveillance component. A license for an individual VeriLook Surveillance 3.1 component is required for each computer that runs the component.

One single computer license for the VeriLook Surveillance component is included with VeriLook Surveillance 3.1 SDK.

Components are copy-protected – a license is required for a component to run. License activation options are listed below on this page.

Additional component licenses may be obtained by VeriLook Surveillance SDK customers as required by their development process.

Product Deployment

To deploy a product developed with VeriLook Surveillance 3.1 SDK, an integrator need obtain only the additional licenses required for the VeriLook Surveillance 3.1 components that will run on each computer belonging to their customers. The available license types for product deployment are the same as for product development.

EEach VeriLook Surveillance component running on a computer belonging to the integrator's customer requires a license. License activation options are listed below on this page.

Single computer licenses

A single computer license allows the installation and running of a VeriLook Surveillance component installation on one computer. Neurotechnology provides a way to renew the license if the computer undergoes changes due to technical maintenance.

Each single computer license requires activation for a VeriLook Surveillance component to run. The available activation options are listed below on this page.

Additional single computer licenses for VeriLook Surveillance components may be obtained at any time by VeriLook Surveillance SDK customers.

License activation options

Single computer licenses are supplied in three ways:

• Serial numbers are used to activate licenses for VeriLook Surveillance components. The activation is done via the Internet or by email. After activation the network connection is not required for single computer license usage.
  Note: activation by serial number is not suitable for virtual environments .
• Internet activation. A special license file is stored on a computer; the license file allows to run VeriLook Surveillance components on that computer after checking the license over the Internet. Internet connection should be available for a short period of time at least once in 7 days. A single computer license can be transferred to another computer by moving the license file there and waiting until the previous activation expires.
• LLicenses may be stored in a volume license manager dongle. License activation using volume license manager may be performed without connection to the Internet and is suitable for virtual environments.

Volume license manager

Volume license manager is used on site by integrators or end users to manage licenses for VeriLook Surveillance components. It consists of license management software and a dongle, used to store the purchased licenses. An integrator or an end-user may use the volume license manager in the following ways:

• Activating single computer licenses – An installation license for a VeriLook Surveillance component will be activated for use on a particular computer. The number of available licenses in the license manager will be decreased by the number of activated licenses.
• Managing single computer via a LAN or the Internet – The license manager allows the management of installation licenses for VeriLook Surveillance components across multiple computers in a LAN or over the Internet. The number of managed licenses is limited by the number of licenses in the license manager. No license activation is required and the license quantity is not decreased. Once issued, the license is assigned to a specific computer on the network.
• Using license manager as a dongle – A volume license manager containing at least one license for a VeriLook Surveillance component may be used as a dongle, allowing the VeriLook Surveillance component to run on the particular computer where the dongle is attached.

Additional VeriLook Surveillance component licenses for the license manager may be purchased at any time. Neurotechnology will generate an update code and send it to you. Simply enter the code into the license manager to add the purchased licenses.

VeriLook Surveillance enterprise license

The VeriLook Surveillance enterprise license allows an unlimited use of VeriLook Surveillance components in end-user products for a specific territory, market segment or project. Specific restrictions would be included in the licensing agreement.

The enterprise license price depends on the application size and the number of potential users of the application within the designated territory, market segment or project.

Licensing VeriEye

Product Development

VeriEye 2.9 Extended SDK (EUR 859) to develop a product based on VeriEye technology. The SDK needs to be purchased just once and may be used by all the developers within the integrator's company.

VeriEye SDKs include a number of components; each particular component has specific functionality. A license for an individual VeriEye component is required for each computer or device that run the component.

(1) Iris Client component includes Iris Extractor and Iris BSS components, which can be also obtained separately. The Iris Client concurrent license may be also used for running the Embedded Iris Client on multiple Android devices.

Components are copy-protected – a license is required for a component to run. License activation options are listed below on this page.

Additional component licenses may be obtained by VeriEye 2.9 SDK customers as required by their development process.

Product Deployment

To deploy a product developed with VeriEye 2.3 / 2.4 / 2.5 / 2.6 / 2.7 / 2.8 / 2.9 SDK, an integrator need obtain only the additional licenses required for the particular VeriEye 2.9 components that will run on each computer or device belonging to their customers. The available VeriEye components and license types for product deployment are the same as for product development.

EEach VeriEye component running on a computer belonging to the integrator's customer requires a license. License activation options are listed below on this page.

Single computer licenses

A single computer license allows the installation and running of a VeriEye component installation on one computer or device. Neurotechnology provides a way to renew the license if the computer undergoes changes due to technical maintenance.

EEach single computer license requires activation for a VeriEye component to run. The available activation options are listed below on this page.

Additional single computer licenses for VeriEye components may be obtained at any time by VeriEye SDK customers.

Concurrent network licenses

Concurrent licenses are available for Iris Client component, allowing the installation of this specific component on an unlimited number of computers. An application obtains a specific license for the capturing process and to perform template creation (extraction). On average it takes less than 10 seconds for iris capturing/enrolling. After this interval the license is released, making it available for another user. One Iris Client concurrent license can be shared among tens of users, making this license especially useful for web-based software.

TThe number of simultaneously running Iris Client component instances is limited by the number of concurrent licenses. Available license management options are listed below on this page.

The concurrent license for Iris Client also allows to run the Embedded Iris Client on multiple Android devices.

Additional concurrent network licenses may be obtained at any time by VeriEye SDK customers.

License activation options

Single computer and concurrent network licenses are supplied in three ways:

• Serial numbers are used to activate licenses for particular VeriEye components. The activation is done via the Internet or by email. After activation the network connection is not required for single computer license usage.
  Note: activation by serial number is not suitable for virtual environments.
• Internet activation. A special license file is stored on a computer or an Android device; the license file allows to run particular VeriEye components on that computer or device after checking the license over the Internet. Internet connection should be available for a short period of time at least once in 7 days. A single computer license can be transferred to another computer or device by moving the license file there and waiting until the previous activation expires.
• LLicenses may be stored in a volume license manager dongle. License activation using volume license manager may be performed without connection to the Internet and is suitable for virtual environments.

Volume license manager

Volume license manager is used on site by integrators or end users to manage licenses for VeriEye components. It consists of license management software and a dongle, used to store the purchased licenses. An integrator or an end-user may use the volume license manager in the following ways:

• Activating single computer licenses – An installation license for a VeriEye component will be activated for use on a particular computer. The number of available licenses in the license manager will be decreased by the number of activated licenses.
• Managing single computer or concurrent licenses via a LAN or the Internet – The license manager allows the management of installation licenses for VeriEye components across multiple computers or Android devices in a LAN or over the Internet. The number of managed licenses is limited by the number of licenses in the license manager. No license activation is required and the license quantity is not decreased. Once issued, the license is assigned to a specific computer or device on the network.
• Using license manager as a dongle – A volume license manager containing at least one license for a VeriEye component may be used as a dongle, allowing the VeriEye component to run on the particular computer where the dongle is attached.

Additional VeriEye component licenses for the license manager may be purchased at any time. Neurotechnology will generate an update code and send it to you. Simply enter the code into the license manager to add the purchased licenses.

VeriEye 2.9 enterprise license

The VeriEye enterprise license allows an unlimited use of VeriEye components in end-user products for a specific territory, market segment or project. Specific restrictions would be included in the licensing agreement.

The enterprise license price depends on the application size and the number of potential users of the application within the designated territory, market segment or project.

Licensing SentiSight

Contents:
• Product development
• Product deployment
• Single computer license
• Activation options
• Volume license manager
• Enterprise license

Product Development

An integrator should obtain a SentiSight 3.3 SDK (EUR 339) to develop a product based on SentiSight technology. The SDK needs to be purchased just once and may be used by all the developers within the integrator's company.

SentiSight 3.3 SDK includes SentiSight component. A license for an individual SentiSight component is required for each CPU that runs the component (a processor can have any number of cores).

One single computer license for the SentiSight component is included with SentiSight 3.3 SDK.

Components are copy-protected – a license is required for a component to run. License activation options are listed below on this page.

Additional component licenses may be obtained by SentiSight SDK customers as required by their development process.

Product Deployment

To deploy a product developed with SentiSight SDK, an integrator need obtain only the additional licenses required for the SentiSight components that will run on each CPU of their customer's computers. The available license types for product deployment are the same as for product development.

Each SentiSight component running on a computer belonging to the integrator's customer requires a license. License activation options are listed below on this page .

Single computer licenses

A single computer license allows the installation and running of a SentiSight component installation on one CPU (a processor can have any number of cores). Neurotechnology provides a way to renew the license if the computer undergoes changes due to technical maintenance.

Each single computer license requires activation for a SentiSight component to run. The available activation options are listed below on this page .

Additional single computer licenses for SentiSight components may be obtained at any time by SentiSight SDK customers.

License activation options

Single computer and concurrent network licenses are supplied in two ways:

• Serial numbers are used to activate licenses for SentiSight components. The activation is done via the Internet or by email. After activation the network connection is not required for single computer license usage.
  Note: activation by serial number is not suitable for virtual environments .
• Internet activation. A special license file is stored on a computer; the license file allows to run SentiSight components on that computer after checking the license over the Internet. Internet connection should be available for a short period of time at least once in 7 days . A single computer license can be transferred to another computer by moving the license file there and waiting until the previous activation expires.
• Licenses may be stored in a volume license manager dongle. License activation using volume license manager may be performed without connection to the Internet and is suitable for virtual environments.

Volume license manager

Volume license manager is used on site by integrators or end users to manage licenses for SentiSight components. It consists of license management software and a dongle, used to store the purchased licenses. An integrator or an end-user may use the volume license manager in the following ways:

• Activating single computer licenses – An installation license for a SentiSight component will be activated for use on a particular computer. The number of available licenses in the license manager will be decreased by the number of activated licenses.
• Managing single computer via a LAN or the Internet – The license manager allows the management of installation licenses for SentiSight components across multiple computers in a LAN or over the Internet. The number of managed licenses is limited by the number of licenses in the license manager. No license activation is required and the license quantity is not decreased. Once issued, the license is assigned to a specific computer on the network.
• Using license manager as a dongle – A volume license manager containing at least one license for a SentiSight component may be used as a dongle, allowing the SentiSight component to run on the particular computer where the dongle is attached.

Additional SentiSight component licenses for the license manager may be purchased at any time. Neurotechnology will generate an update code and send it to you. Simply enter the code into the license manager to add the purchased licenses.

SentiSight 3.3 enterprise license

The SentiSight enterprise license allows an unlimited use of SentiSight components in end-user products for a specific territory, market segment or project. Specific restrictions would be included in the licensing agreement.

The enterprise license price depends on the application size and the number of potential users of the application within the designated territory, market segment or project.

For more information please contact us .

Back to the top of this page

Licensing SentiSight Embedded

Contents:
• Product development
• Product deployment
• Single computer license
• Activation options
• Volume license manager
• Enterprise license

Product Development

An integrator should obtain a SentiSight Embedded 1.2 SDK (EUR 339) to develop a product based on SentiSight Embedded technology. The SDK needs to be purchased just once and may be used by all the developers within the integrator's company.

SentiSight Embedded 1.2 SDK includes SentiSight Embedded component. A license for an individual SentiSight Embedded component is required for each CPU that runs the component (a processor can have any number of cores).

1 single computer license for SentiSight Embedded component is included with SentiSight Embedded 1.2 SDK.

Components are copy-protected – a license is required for a component to run. License activation options are listed below on this page.

Additional component licenses may be obtained by SentiSight Embedded SDK customers as required by their development process.

Product Deployment

To deploy a product developed with SentiSight Embedded SDK, an integrator needs to obtain only the additional licenses required for the particular SentiSight Embedded components that will run on each CPU of their customer's devices or computers. The available SentiSight Embedded components and license types for product deployment are the same as for product development.

Each SentiSight Embedded component running on a device or computer belonging to the integrator's customer requires a license. License activation options are listed below on this page.

Single computer licenses

A single computer license allows the installation and running of a SentiSight Embedded component installation on one CPU (a processor can have any number of cores).

Each single computer license requires activation for a SentiSight Embedded component to run. The available activation options are listed below on this page.

Additional single computer licenses for SentiSight Embedded components may be obtained at any time by SentiSight Embedded SDK customers.

License activation options

Single computer licenses for SentiSight Embedded components are supplied in two ways:

• Internet activation. A special license file is stored on a device or computer; the license file allows to run particular SentiSight Embedded components on that device or computer after checking the license over the Internet. Internet connection should be available for a short period of time at least once in 7 days . A single computer license can be transferred to another device or computer by moving the license file there and waiting until the previous activation expires.
• Serial numbers are used to activate licenses for particular SentiSight Embedded components. The activation is done via the Internet or by email. After activation the network connection is not required for single computer license usage.
  Note: activation by serial number is not suitable for virtual environments.
• Licenses may be stored in a volume license manager dongle. License activation using volume license manager may be performed without connection to the Internet.

Volume license manager

Volume license manager is used on site by integrators or end users to manage single computer licenses for SentiSight Embedded components via a LAN or the Internet. It consists of license management software and a dongle, used to store the purchased licenses.

The license manager allows the management of installation licenses for SentiSight Embedded components across multiple devices or computers in the network. The number of managed licenses is limited by the number of licenses in the license manager. Once issued, the license is assigned to a specific device or computer on the network.

The volume license manager requires a PC with Microsoft Windows or Linux to run the license management software; the dongle would be connected to the PC.

Additional SentiSight Embedded component licenses for the license manager may be purchased at any time. Neurotechnology will generate an update code and send it to you. Simply enter the code into the license manager to add the purchased licenses.

SentiSight Embedded enterprise license

The SentiSight Embedded enterprise license allows an unlimited use of SentiSight Embedded components in end-user products for a specific territory, market segment or project. Specific restrictions would be included in the licensing agreement.

The enterprise license price depends on the application size and the number of potential users of the application within the designated territory, market segment or project.

For more information please contact us.

Back to the top of this page

Licensing SentiGaze

Contents:
• Product development
• Product deployment
• Single computer license
• Activation options
• Volume license manager
• Enterprise license

Product Development

An integrator should obtain a SentiGaze SDK (EUR 890) to develop a product based on SentiGaze technology. The SDK needs to be purchased just once and may be used by all the developers within the integrator's company.

SentiGaze SDK includes SentiGaze component. A license for an individual SentiGaze component is required for each CPU that runs the component (a processor can have any number of cores).

One single computer license for the SentiGaze component is included with SentiGaze SDK.

Components are copy-protected – a license is required for a component to run. License activation options are listed below on this page.

Additional component licenses may be obtained by SentiGaze SDK customers as required by their development process.

Product Deployment

To deploy a product developed with SentiGaze SDK, an integrator need obtain only the additional licenses required for the SentiGaze components that will run on each CPU of their customer's computers. The available license types for product deployment are the same as for product development.

Each SentiGaze component running on a computer belonging to the integrator's customer requires a license. License activation options are listed below on this page.

Single computer licenses

A single computer license allows the installation and running of a SentiGaze component installation on one CPU (a processor can have any number of cores). Neurotechnology provides a way to renew the license if the computer undergoes changes due to technical maintenance.

Each single computer license requires activation for a SentiGaze component to run. The available activation options are listed below on this page.

Additional single computer licenses for SentiGaze components may be obtained at any time by SentiGaze SDK customers.

License activation options

Single computer and concurrent network licenses are supplied in two ways:

• Serial numbers are used to activate licenses for SentiGaze components. The activation is done via the Internet or by email. After activation the network connection is not required for single computer license usage.
  Note: activation by serial number is not suitable for virtual environments .
• Internet activation. A special license file is stored on a computer; the license file allows to run SentiGaze components on that computer after checking the license over the Internet. Internet connection should be available for a short period of time at least once in 7 days. A single computer license can be transferred to another computer by moving the license file there and waiting until the previous activation expires.
• Licenses may be stored in a volume license manager dongle. License activation using volume license manager may be performed without connection to the Internet and is suitable for virtual environments.

Volume license manager

Volume license manager is used on site by integrators or end users to manage licenses for SentiGaze components. It consists of license management software and a dongle, used to store the purchased licenses. An integrator or an end-user may use the volume license manager in the following ways:

• Activating single computer licenses – An installation license for a SentiGaze component will be activated for use on a particular computer. The number of available licenses in the license manager will be decreased by the number of activated licenses.
• Managing single computer via a LAN or the Internet – The license manager allows the management of installation licenses for SentiGaze components across multiple computers in a LAN or over the Internet. The number of managed licenses is limited by the number of licenses in the license manager. No license activation is required and the license quantity is not decreased. Once issued, the license is assigned to a specific computer on the network.
• Using license manager as a dongle – A volume license manager containing at least one license for a SentiGaze component may be used as a dongle, allowing the SentiGaze component to run on the particular computer where the dongle is attached.

Additional SentiGaze component licenses for the license manager may be purchased at any time. Neurotechnology will generate an update code and send it to you. Simply enter the code into the license manager to add the purchased licenses.

SentiGaze enterprise license

The SentiGaze enterprise license allows an unlimited use of SentiGaze components in end-user products for a specific territory, market segment or project. Specific restrictions would be included in the licensing agreement.

The enterprise license price depends on the application size and the number of potential users of the application within the designated territory, market segment or project.

For more information please contact us.

Back to the top of this page

Licensing NCheck Bio Attendance

A license for NCheck Bio Attendance application is required for each PC or each Android-based device that runs this application. The license is called single computer license.

Single computer licenses

A single computer license allows to install and run a NCheck Bio Attendance application installation on a single Personal Computer or a single Android-based device. The license will not be lost if computer will be reinstalled.

The installation license should be activated before starting using an NCheck Bio Attendance software installation. A deactivation is available in case the license needs to be moved to another PC or device.

The following license activation options are available:

• automatic activation – the NCheck Bio Attendance application will communicate with Neurotechnology's server and perform all actions needed for activation. Note that this method requires Internet connection when activating or deactivating the license for the PC or device with the NCheck Bio Attendance software; after the license is activated, the PC or device no longer need to be connected to the Internet.
• manual activation – this method is suitable when the PC or device with NCheck Bio Attendance software is not connected to the Internet. The manual activation requires to generate a hardware ID for the PC or device running the NCheck Bio Attendance software. See NCheck Bio Attendance documentation for detailed instructions.
• use a dongle – this method requires to purchase a dongle (special hardware token) that needs to be connected all the time to the USB port of the PC that runs the NCheck Bio Attendance software. No online registration required.

Single computer license activated over Internet or by email is not suitable for virtual environments. The dongle will be required.

Back to the top of this page

Licensing NVeiler Video Filter plug-in

A license for NVeiler Video Filter plug-in is required for each PC that runs this plug-in. The license is called single computer license.

Additional licenses for NVeiler Video Filter plug-in can be purchased at any time.

Single computer licenses

A single computer license allows to install and run a NVeiler Video Filter plug-in installation on a single Personal Computer. The license will not be lost if computer will be reinstalled.

The installation license should be activated before starting using an NVeiler Video Filter plug-in installation. A deactivation is available in case the license needs to be moved to another PC.

The following license activation options are available:

• automatic activation – the NVeiler Video Filter will communicate with Neurotechnology's server and perform all actions needed for activation. Note that this method requires Internet connection when activating or deactivating the license for the PC with the NVeiler Video Filter software; after the license is activated, the PC no longer needs to be connected to the Internet.
• manual activation – this method is suitable when the PC with NVeiler Video Filter software is not connected to the Internet. The manual activation requires to generate a hardware ID for the PC running the NVeiler Video Filter software. See NVeiler Video Filter plug-in documentation for detailed instructions.
• use a dongle – this method requires to purchase a dongle (special hardware token) that needs to be connected all the time to the USB port of the PC that runs the NVeiler Video Filter software. No online registration required.

Single computer license activated over Internet or by email is not suitable for virtual environments. The dongle will be required.

Back to the top of this page

Licensing Model for value-added resellers (VAR)

In some cases, customers of MegaMatcher, VeriFinger, VeriLook, VeriEye and VeriSpeak SDKs may want not only to implement SDK based end-user products, but also to develop and sell their own software developing tools (own SDK, end-user products with additional developing possibilities etc.). An ordinary SDK license allows to integrate only end-user products, but does not allow incorporating Neurotechnology SDKs as part of development tool or software development kit, therefore a special Value-added Reseller (VAR) licensing model is required.

Neurotechnology offers VAR licensing model for the MegaMatcher 5.1 SDK. This VAR licensing model also covers VeriFinger 7.1 SDK, VeriLook 5.6 SDK, VeriEye 2.9 SDK and VeriSpeak 2.2 SDK.

Neurotechnology VARs has the following advantages respect other integrators:

1. A VAR can develop and sell not only end-user products, but also their own Software Developing tools without API, pricing, licensing terms or functionality limitations from the Neurotechnology side.
2. The VARs are required to buy only installation licenses from Neurotechnology, but they are not required to obtain SDK licenses, although they can sell such licenses themselves.
3. The VARs can issue their own products (including their developing tools) with their own trademark and copyrights. Neurotechnology only requires to include a copyright notice about used algorithm in the VAR product documentation.
4. VAR product licenses are specific for each VAR and incompatible with Neurotechnology or it other VARs or integrator licenses. Therefore, a VAR's customer can obtain further licenses only from VAR, but can't buy such licenses from other sources.

In order to become a VAR, a developer needs to obtain VAR licenses for any MegaMatcher 5.1 biometric component for at least EUR 3,500.00 or equivalent amount in other currency. The VAR will receive MegaMatcher 5.1 VAR SDK for technology integration into custom development tools or end user products. Additional VAR licenses for MegaMatcher 5.1 components can be purchased at any time.

Contact us for more information about VAR pricing and ordering.

Back to the top of this page