Futronic FS91 USB 2.0 Mini Fingerprint Module

FS91 USB2.0 Mini Fingerprint Scanner uses specially designed optical system to deliver high quality image in a very small form factor. It is 57(L) x 29(W) x 27(H)mm and just slightly larger than one half of Futronic FS80 USB2.0 Fingerprint Scanner but can capture a fingerprint image with quality as good as FS80. It can scan an almost un-distorted raw fingerprint image into PC in 100ms and is good for any fingerprint recognition application.

FS91 is perfect device for mobile application. It is small and with a 0.3 meter USB cable which is more convenient to be carried around by notebook PC users and used together with PDA or mobile phone.

FS90 USB 2.0 OEM Module Technical Specifications

⁽¹⁾ These operating systems are supported by Neurotechnology SDKs.

Back to the top of this page

Electrical characteristics

• Light source: Infrared LED
• Supply voltage: DC 4.5-5.5V via USB port
• Power consumption:
  • active <650mW(during scanning)
  • standby <200mW(when scanner is connected PC but no scanning)
  • sleep mode <4mW(activated by standard USB bus event only)
• ESD contact - 8KV and air discharge - 16KV, no permanent damage

Product Compatibility

The Futronic FS90 USB 2.0 OEM Reader is compatible with many different software development kits and applications.  Below is the list of products that are currently known to support this scanner.  Please note that some applications and development kits require specific versions of the drivers to be installed. Please contact us if you need additional information.

Supported Software Development Kits:

VeriFinger Standard and Extended SDK
MegaMatcher Standard and Extended SDK

Supported Applications:

FbF^(TM) Device Listener

Back to the top of this page