Tacoma CMOS Scanner
The Tacoma CMOS sensor is a simple optical finger scanning device with 500 dpi resolution and USB connection. This device is suitable for projects which require 1:1 verification such as application login or small scale 1:N identification. This sensor is the lowest cost optical fingerprint scanner available. The image size captured by the optical imager is smaller than average for optical fingerprint readers which reduces the total amount of minutiae captured in each image.
Tacoma CMOS Scanner Technical Specifications
| Equipment |
Optical Capture Device |
| Interfaces |
USB V2.0 |
| Fingerprint Sensor
Resolution |
500 dpi with distortion<1% |
| Capture Area |
13 x 13mm: ( 256*256) |
| Dimension |
69.4 x 26.9 x 29.7(mm) |
| Image Capture Time |
8 Frames /sec. |
| Power Consumption |
5V DC Max Current
< 150mA |
| Working Environment |
-5℃ ~ 70℃ |
Back
to
the top of this page
Product Compatibility
The Tacoma CMOS Scanner is compatible with several different
software
development kits. Below is the list of products
that are currently known to support this scanner. Please note
that some applications and development kits require specific versions
of the drivers to be installed. Please contact us if you need
additional information.
Supported Software Development Kits:
VeriFinger Standard and Extended SDK
MegaMatcher Standard and Extended SDK
Supported Applications:
None at this time.
Back to the top of this page
0 
