FB84 ethernet Fingerprint Authentication Module(eFAM)
Major features and benefit:
FB84 ethernet Fingerprint Authentication Module (eFAM) combines both high performance fingerprint scanner and recognition engine into one device. It has internal memory that can store up to 2500 fingerprint templates.
Any host system can control the FB84 via standard Ethernet interface to enroll finger and recognize finger. The recognition result will be sent from FS84 to the host.
4 wires serial interface is also available. So FB84 can be used for both embedded and remote fingerprint recognition application. Fingerprint images and templates can be transferred between FB84 and host system via serial and ethernet interface.
FB84 has 1 output channel (for external relay control) and 2 input channels(for door sensor and switch). So it can be used as a fingerprint access control device.
Specification
Fingerprint scanner:
Fingerprint scanning window size is 16x24mm
Image resolution is 480x320 pixel, 500 DPI
Raw fingerprint image file size is 150K byte
Light source: Infrared LED
Fingerprint recognition engine:
Processor: Analog Device ADSP-BF532
16MB SDRAM and 16MB Flash memory
Can store up the 2500 fingerprint templates
With Futronic proprietary software and fingerprint recognition algorithm
Fingerprint recognition accuracy: FAR-10-6, FRR-10-2
Fingerprint template format same as all other Futronic products
Electrical:
4 wires serial interface, VCC, GND, TX and RX. Speed up to 961200bps.
Ethernet communication speed: 10M
Supply voltage: 12V. Max current consumption: 250mA
1 output and 2 input channels for controlling external devices
2 output channels for controlling external LEDs
ESD: contact 8KV and air discharge 16KV no permanent damage
Others:
Built in buzzer for status indication
Weight: 200 grams
Size: 105mm(L) x 80mm(W) x 40mm(H)
Operation temperature: -20 to +55 Degree Celsius
Finger scanning Window is waterproof
|
FB84 Pro Ethernet
